CAM ANALYSER
The apparatus is designed to study the cam profiles and performance of cam and follower system. A shaft supported by ball bearings upon which three different types of cams can be mounted.
Product Code : ELSHADDAI DYN - 001
Send A EnquiryGYROSCOPE
It is designed to verify the gyroscopic rules of a plane rotating disc The set up consists of heavy stainless steel disc mounted on a horizontal shaft, rotated by a variable speed motor. Rotor disc can be move about three axis.
Product Code : ELSHADDAI DYN - 002
Send A Enquiry
GOVERNOR
To study the determination of characteristics curves of radius of rotation against controlling force (Actual & Theoretical) for all governors. The set-up is designed to study the working of different governors normally used to control the speed. It consists of a main spindle, mounted vertically on the base plate.
Product Code : ELSHADDAI DYN - 003
Send A EnquiryWHIRLING OF SHAFT
In a rotating shaft at which instability occurs is called whirling or critical speed. When shaft reaches critical speed it will have maximum deflection. It is applicable in power transmitting equipments like turbine, propeller shafts, etc.
Product Code : ELSHADDAI DYN - 004
Send A Enquiry
STATIC AND DYNAMIC BALANCING MACHINE
This equipment is designed for carrying out the experiment for balancing a rotation mass system. The apparatus consists of four circular discs mounted on a shaft. The discs are grooved for the attachment of weights at a specific radius. The block are clamped on shaft is rotated by a motor to check dynamic balance of the system.
Product Code : ELSHADDAI DYN - 005
Send A EnquiryVIBRATING TABLE
To determine transmissibility of forced vibrations and to analyze all types of Vibrations with its frequency and amplitude
Motor:1/6 HP, Speed:2800 Rpm With Digital Rpm Indicator,
Dimension:L B H 1000 X 700 X 950 Approx,
Overall Weight:60 Kg (Approx)
Product Code : ELSHADDAI DYN - 006
Send A Enquiry
VIBRATION TEST FACILITIES APPARATUS
The apparatus is designed to help in conducting various experiments to illustrate and verify the principles and relations involved in the study of vibrations. Following experiments can be performed with this unit.
Product Code : ELSHADDAI DYN - 007
Send A EnquiryKINEMATICS OF VARIOUS MECHANISMS
A four-bar linkage, also called a four-bar, is the simplest movable closed chain linkage. It consists of four bodies, called bars or links, connected in a loop by four joints.
SINGLE SLIDER CRANK MECHANISM : When one of turning pairs of a four bar chain is replaced by sliding pair, it becomes a single slider crank chain
DOUBLE SLIDER CRANK MECHANISM : The double slider-crank linkage has four links joined in a kinematic chain consisting of two revolute joints and two sliding or prismatic joints
Product Code : ELSHADDAI DYN - 008
Send A Enquiry
DYNAMIC BALANCING MACHINE
Weight : 2-10kg,
Max. Distance Between Bearing: 500mm,
Balancing Speed Range (N)600-3000rpm,
Shaft Diameter5-50mm,
Power Of Drive Motor 0.33hp
,
Acceleration Capacity Gd2 N20.40x106 Kgm2n2,
Max. Unbalance Mass Read At 100% Of Meter Scale:30gm
Product Code : ELSHADDAI DYN - 009
Send A EnquiryBALANCING OF ROTATING MASS
HP: 1/12,
TYPE: AC,
VARICAC DIMMER,
SPEED6500 (approx),
DISC4 DISCS,
MASSES4 masses 60, 90, 115, 150gm,
DIMENSIONS:600 x 600 x 325 approx
Product Code : ELSHADDAI DYN - 010
Send A Enquiry
JOURNAL BEARING APPARATUS
EEE Journal Bearing apparatus for investigating the distribution of pressure in slide bearings illustrates the principle of hydrodynamic lubrication. The distribution of pressure and the carrying capacity can be determined on a sliding bearing model at different bearing loads and speeds. The sliding bearing consists of a bearing journal driven by an electrical motor and the freely moving bearing housing. The bearing is loaded with different, interchangeable weights. The setup contains manometer tubes, dc motor, dc drive to control speed, set of weights, oil tank, Journal bearing along with the shaft.
Product Code : ELSHADDAI DYN - 011
Send A EnquirySIMPLE GEAR TRAIN
A simple gear train uses two gears, which may be of different sizes. If one of these gears is attached to a motor or a crank then it is called the driver gear. The gear that is turned by the driver gear is called the driven gear.
Product Code : ELSHADDAI DYN - 012
Send A Enquiry
BEVEL GEAR
Either of a pair of gears with teeth surfaces cut so that they can connect unparallel gear shafts. (Mechanical Engineering) a gear having teeth cut into a conical surface known as the pitch zone. Two such gears mesh together totransmit power between two shafts at an angle to each other
Product Code : ELSHADDAI DYN - 013
Send A EnquiryWORM GEAR
A gear consisting of a spirally threaded shaft and a wheel with marginal teeth that mesh into it. The toothed wheel of this gear; a worm wheel.
Product Code : ELSHADDAI DYN - 014
Send A Enquiry
DIFFERENTIAL GEAR
An arrangement of gears in an epicyclic train permitting the rotation of two shafts at different speeds, used on the rear axle ofautomotive vehicles to allow different rates of wheel rotation on curves. An arrangement of gears in an epicyclic train permitting the rotation of two shafts at different speeds, used on the rear axle ofautomotive vehicles to allow different rates of wheel rotation on curves.
Product Code : ELSHADDAI DYN - 015
Send A EnquirySPUR GEAR
A gear with teeth radially arrayed on the rim parallel to its axis. (Mechanical Engineering) a gear having involuted teeth either straight or helically cut on a cylindrical surface. Two such gears areused to transmit power between parallel shafts.
Product Code : ELSHADDAI DYN - 016
Send A Enquiry
COMPOUND GEAR TRAIN
Compound gear trains involve several pairs of meshing gears. They are used where large speed changes are required or to get different outputs moving at different speed
Product Code : ELSHADDAI DYN - 017
Send A EnquiryHELICAL GEAR
Compound gear trains involve several pairs of meshing gears. They are used where large speed changes are required or to get different outputs moving at different speed
Product Code : ELSHADDAI DYN - 018
Send A Enquiry
Epicycle gear Train Apparatus
Gear Train is any combination of gear wheels by which motion is transmitted from one shaft to another shaft. In epicyclic gear trains, the axes of shafts on which the gears are mounted may move relative to a fixed axis.
Product Code : ELSHADDAI DYN - 019
Send A EnquiryMichel Tilting Pad Bearing Apparatus
The apparatus consists of a pad, which can be tilted to the required angle. An endless belt, which moves beneath the pad, carries the oil over its surface from oil bath. When the pad is tilted over the oil film, pressure is developed, the pad is provided with pressure tapings parallel and perpendicular to belt direction. The pressure distribution is measured over a multi tube manometer. The belt is driven by a variable speed motor. The tilting angle and minimum gap between pad and belt can be adjusted and characteristics thus can be studied at various gaps, inclination and relative surface speeds.
Product Code : ELSHADDAI DYN - 020
Send A Enquiry
PIN ON DISC WEAR APPARATUS
The Pin And Disc wear Apparatus consists of a steel disc whose top surface is case hardened and ground. The disc is rotated by a single ph. Induction motor at 3 different speeds. The test pin is inserted in a pin guide so that one end of pin touches the rotating disc. The pin guide is mounted on a cantilever to which spring balance is attached.
Product Code : ELSHADDAI DYN - 021
Send A Enquiry
ROPE BRAKE DYNAMOMETER
230 V Single Phase
Rope Brake Drum Assembly
Digital R.P.M. Indicator
Energy meter, Voltmeter, Ammeter to measure input power of motor
Product Code : ELSHADDAI DYN - 022
Send A EnquiryCORIOLIS COMPONENT OF ACCELERATION
The set-up is designed to study Coriolli's Component of Acceleration of a slider crank mechanism. Here the mechanical slider system is replaced by a continuous stream of water flowing through a steady rotating pair of tubes. These tubes can be rotated at various speeds by using a swinging field motor which also acts as dynamometer.
Product Code : ELSHADDAI DYN - 023
Send A Enquiry
Slip & Creep Measurement Apparatus in Belt Drive
This apparatus is useful for measurement of power transmitted for various input power conditions with varied belt tension. Belt slip or creep also can be measured. The apparatus consists of a variable speed D.C. Motor, driving pulley and driven pulley of equal diameters. The pulleys are mounted on input shaft (motor shaft) and output shaft. The driven pulley can slide on the base only with bearing block to change the initial tension in belt
Product Code : ELSHADDAI DYN - 024
Send A EnquiryLathe tool Dynamometer
Elshaddai’s Tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. 3 ½ digit display 500 & model (a) 500 kg force in XYZ direction
Product Code : ELSHADDAI DYN - 025
Send A Enquiry
Drill Tool Dynamometer
Elshaddai’s Tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed
Product Code : ELSHADDAI DYN - 026
Send A EnquiryMilling Tool Dynamometer
Elshaddai’s Tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyse the optimum feed, speed and depth of cut on different materials
Product Code : ELSHADDAI DYN - 027
Send A Enquiry
Spring Mass System
The apparatus is designed to help in conducting various experiments to illustrate and verify the principles and relations involved in the study of vibrations. Following experiments can be performed with this unit.
Product Code : ELSHADDAI DYN - 028
Send A EnquiryBeam Deflection Setup
The apparatus is designed to help in conducting various experiments to illustrate and verify the principles and relations involved in the study of vibrations. Following experiments can be performed with this unit.
Product Code : ELSHADDAI DYN - 029
Send A Enquiry
Transverse Vibration Setup
The apparatus is designed to help in conducting various experiments to illustrate and verify the principles and relations involved in the study of vibrations. Following experiments can be performed with this unit.
Product Code : ELSHADDAI DYN - 030
Send A EnquiryUNIVERSAL VIBRATION SETUP
To verify the relation simple pendulum.
To verify the relation of compound pendulum & to determine the radius of gyration.
To study radius of gyration of bi-filar suspension.
To study the undamped free vibration of spring mass system.
Product Code : ELSHADDAI DYN - 031
Send A Enquiry
Friction and were test rig
It is essential to decide the wear rate at design stage, in doing so it is necessary to develop such an equipment which will serve the purpose of material testing. The purpose of friction and wear test
Product Code : ELSHADDAI DYN - 032
Send A EnquiryGear Models
Our organization has gained name and fame in the field of offering Gear Model to the clients. There is a unique and diverse range of these gear modulation available with our organization. These are available in excellent technical specifications and are renowned for their hassle free performance for long period of time
Product Code : ELSHADDAI DYN - 033
Send A Enquiry
Transverse Vibration Set Up
Frame Size:1200X450
2 channel 500mm length
Scale fitting movable
Product Code : ELSHADDAI DYN - 034
Send A EnquiryFly Wheel Connecting Rod
FLYWHEEL and connecting rod is useful to calculate ‘moment of inertia of connecting rod by oscillation. The effect of flywheel can be observed on oscillations of connecting rod.The apparatus consist of a bearing block mounted on support.
Product Code : ELSHADDAI DYN - 035
Send A Enquiry
Single and Two Rotor System
To determine the natural frequency of undamped torsional vibration of a single rotor shaft system. When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as torsional vibrations. The shaft is twisted and untwisted alternatively and the torsional shear stresses are induced in the shaft.
Product Code : ELSHADDAI DYN - 036
Send A EnquiryTurn Table Apparatus
The set-up is developed for the students of Mechanical Engg., to experimentally determine the Moment of Inertia of a Disk Ring in rotational motion.
Product Code : ELSHADDAI DYN - 037
Send A Enquiry
Dynamic Balancing Of Reciprocating Masses
Dimension 300 x 250 x 400 mm the entire system is mounted on a heavy duty frame which is embedded with multi springs to absorb the shock generated while reciprocation is in action with reciprocating system duly fixed on the frame and driven through dc motor with variable rpm level and duly indicated through the digital rpm monitor.
Product Code : ELSHADDAI DYN - 038
Send A EnquiryFree vibration analysis (Spring Mass System)
When a spring is stretched or compressed by a mass, the spring develops a restoring force. Hooke's law gives the relationship of the force exerted by the spring when the spring is compressed or stretched a certain length. In terms of energy, all systems have two types of energy, potential energy and kinetic energy. When a spring is stretched or compressed, it stores elastic potential energy, which then is transferred into kinetic energy
Product Code : ELSHADDAI DYN - 039
Send A Enquiry
Forced vibration analysis (Spring Mass System Motorised)
A system is said to be a cantilever beam system if one end of the system is rigidly fixed to a support and the other end is free to move. Few Examples of Real life systems which can be approximated to Cantilever Beam are shown. Single degree of freedom mass spring damper system under free vibration is governed by the following differential equation
Product Code : ELSHADDAI DYN - 038
Send A EnquiryVIBRATION MEASUREMENT
-
VIBRATION MEASUREMENT BY USING VIBROMETER
VIBRATION MEASUREMENT USING ACCELERATOR
- Accelerometer with Magnetic Mounting Base
- Vibration Indicator
- Active Fitter
- Vibration Exciter
- Power Oscillator
VIBRATION MEASUREMENT USING ELECTRODYNAMICS TYPE PICK UP
- Vibration Sensor
- Vibration Indicator
- Vibration Exciter
- Power Oscillator
VIBRATION MEASUREMENT BY STROBOSCOPIC METHOD
VIBRATION MEASUREMENT BY OSCILLOSCOPE DUAL TRACE
BEARING (SET OF ALL BEARING)
-
SHAFTING GENERAL BEARING
BALL BEARINGS
BALL BEARINGS SET
GEAR MODELS
-
SINGLE STAGE SPUR GEARS
SINGLE STAGE SPUR GEARS WITH INTERMEDIATE
TWO STAGE SPUR GEARS
THREE STAGE SPUR GEARS
SINGLE STAGE BEVEL GEARS
SINGLE STAGE HELICAL GEARS
SINGLE STAGE SPIRAL GEARS
GEARS SETS
Big
Set of 8
HERRINGBONE GEARS
Set of 4
Set of 8
INTEMAL GEARS PINION DRIVE
RACK & QUADRANT GEARS
SLIDING WEDGE GEARS WITH STRAIGHT LINE
INTEMAL GEARS PINION DRIVE
RACK & PINION
EPICYCLE GEAR
EPICYCLE GEAR (Sun & planet type)
CYCLODIAL GEAR
REVERSING GEAR
WORM GEAR
TRAIN OF GEAR WHEELS
Simple
Compound
INTER CONNECTED GEAR
GEAR BOX (3 speed & reverse gear)
Without Clutch
With Clutch
DIFFERENTIAL GEAR
SHAPER MODEL
KEY & JOINTS MODELS
-
KEYS (Set of 5)
KUNCKLE JOINT
COTTER JOINT
GIB & COTTER JOINT
TIE ROD JOINT
SLEEVE & COTTER JOINT
SOCKET & SPIGOT JOINT
RIVETTED JOINTS SET of 4 (Wooden Models)
RIVETTED JOINTS (Wooden Models)
- RIVETTED JOINTS TRIPPLE
- RIVETTED JOINTS QUADRUPPLE
RIVETTED JOINTS ANGLE LRON & GIRDER JOINTS
RIVETS SET OF 4 (Metal Model)
GIRDER MODEL (Wooden)
ROLLED SECTIONAL MODELS SET OF 4 (Wooden)
PLATE GIRDER
BOX GIRDER
N. GIRDER
WHIRLING OF SHAFT APPARATUS
STRAIN MEASUREMENT
LOAD MEASUREMENT
PRESSURE MEASUREMENT
DISPLACEMENT MEASUREMENT
FOUR BAR LINK MECHANISM
RECIPROCATING ENGINE MECHANISM
OSCILLATING CYLINDER MECHANISM
WHITWORTH'S QUICK RETURN MECHANISM
CRANK & SLOTTED LEVER ARM MECHANISM
OLDHAMS COUPLING
UNIVERSAL COUPLING
MACHINE TOOLS DYNAMOMETERS
-
MILLING TOOL DYNAMOMETER
GRINDING TOOL DYNAMOMETER
CAMS & FOLLOWER MODELS
-
Plate or Disc Cam with flat faced reciprocating follower
Tangent Cam with roller Oscillating follower
Cylinder Cam with reciprocating follower
Translating Cam with Reciprocating Follower
End Cam with Translating Follower
Tri Cloven Heat Cam
Triangular Eccentric Cam
MECHANISM MODELS
-
Friction Wheel Drive
Chain Drive
Geneva Driver
Pawl & Ratchet Motion
Crank & Connecting Rod Model
Slide Crank Mechanism
- Reciprocating Engine Mechanism
- Oscillating Cylinder Mechanism
- Withworth Quick Return Mechanism
Slide Crank Mechanism with calibrated dials
- Reciprocating Engine Mechanism
- Oscillating Cylinder Mechanism
- Witworth Quick Return Mechanism
Four Bar Link Mechanism
Scotch Yoke Mechanism
Elliese tracer Model
Watts Mechanism
Peculiar Linkage Drive Model
Pantograph Mechanism
Kinematic Pairs
Crank Shaft to Slider Mechanism
BRAKE MODEL
-
Single Shoe Brake
Double Shoe Brake
Band Brake
Band & Block Brake
Internally Expanding Brake
Disc Brake Model
Disc Brake Actual Working
Hydraulic Brake Unit
Hydraulic Brake Unit (Two Brake Drums)
Hydraulic Brake Unit (Four Brake Drums)
Mechanical Brake System
Power Brake Actual Working
Air Brake Actual Working
COUPLING MODELS
-
SELLERS COUPLING
UNIVERSAL COUPLING
HOOK'S COUPLING
HOOK'S COUPLING (Double)
DOUBLE HOOK'S COUPLING EXPERIMENTAL APPARATUS
FLEXIBLE COUPLING
BOX OR MUFF COUPLING
FLANGED COUPLING
SPLIT MUFF COUPLING
OLDHAM'S COUPLING
Small
Big
CLUTCH MODEL
-
CLAW CLUTCH
CONICAL FRICTION CLUTCH
PLATE CLUTCH
CENTRIFUGAL CLUTCH
MULTI PLATE CLUTCH
