Manufacturer, Supplier, and Exporter of Batch Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
This set up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90C with the help of digital temperature indicator cum controller. Samples can be taken out with the help of a sampling pipette.
Manufacturer, Supplier, and Exporter of Semi Batch Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The set up consists of a reactor fitted in a constant temperature water bath. Before starting the reaction, the reactor is charged with measured quantity of one the reactant. From a feed tank another reactant is fed to reactor. Using a sampling pipette samples can be taken out for analysis after fixed interval. Rotameter is provided to measure the flow of chemicals. The compressed air is used for circulation of feed. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 70C with the help of digital temperature indicator cum controller. Pressure regulator, pressure gauge and safety valve are fitted in the compressed air line.
Manufacturer, Supplier, and Exporter of Plug Flow Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
This set up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameter are provided to measure the individual flow of chemicals. The flow rate can be adjusted by operating the needle valves provided on respective rotameter. The compressed air is used for circulation of feed. It is a helical coil tube type reactor kept in a constant temperature water bath to conduct the experiment at various temperatures. Reactants enter at lower and coming out of the top of coil from where samples are collected for analysis. Pressure regulator, pressure gauge and safety valve are fitted in the compressed air line.
Manufacturer, Supplier, and Exporter of CSTR Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTs
The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. The CSTR is fitted with stirrer for proper mixing. From top outlet of its samples are collected for analysis. Pressure regulator, pressure gauge and safety valve are fitted in the compressed air line.
Manufacturer, Supplier, and Exporter of Photo Chemical Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
This set up is used to study a photo catalytic reaction using a UV source needed in the form of an UV tube. This set up can be used to carry out a parameter study under batch / continuous flow condition. A photo catalyst like TiO2 can be used. This set up can also be used to study the mineralization of liquid effluent industrial streams & for a purification of water. Light source: C type UV lights fitted in a heavy metal enclosure with a stainless steel highly polished reflector. Two clamping rods are needed for holding the suspended glass reactor. A cooling fan is needed at the base of the reactor. Complete with switches, indicator, lights, plug and cord.
Manufacturer, Supplier, and Exporter of CSTR in Series Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The set up consists of three CSTR arranged in series and two feed tanks through which two reactants are fed to the reactor. Rotameter are provided to measure the individual flow of chemicals. The flow rate can be adjusted by operating the needle valves provided on respective rotameter.
Manufacturer, Supplier, and Exporter of Packed Bed Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The set up consists of a glass column packed with rasching rings and two feed tanks. Reactants are fed to the reactor through liquid distributor, fitted at the bottom of the column. Rotameter are provided to measure the individual flow of chemicals. The flow rate can be adjusted by operating the needle valves provided on respective rotameter. samples can be taken periodically from the top outlet of reactor. Pressure regulator, pressure gauge are fitted in the compressed air line.
Manufacturer, Supplier, and Exporter of Packed Bed Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The process set up consists of heating tank fitted with temperature control trainer for on line heating of the water. Water is supplied from laboratory constant head tank and its flow can be manipulated and measured by provided rotameter. The temperature of the heated water is sensed by RTD sensor. This measured variable through temperature transmitter is communicated to digital indicating controller.
Manufacturer, Supplier, and Exporter of Packed Bed Reactor (Coiled tube type) Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
In an ideal Plug Flow Reactor (Coiled Tube Type) there is no mixing in the direction of flow and complete mixing perpendicular to the direction of flow. The concentration of reactants varies along the length of the reactor but not in radial direction. The set up consists of two feed tanks through which two reactants are fed to the reactor. It is a helical coil tube type reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in the coil tube type plug flow reactor. The magnetic drive pump is used for circulation of feed. Reactants enter at the lower end coming out of the top of the coil from where samples are collected for analysis. This set up is used to study a non-catalytic homogeneous reaction under isothermal condition.
Manufacturer, Supplier, and Exporter of Isothermal Batch Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
A batch reactor can operate under conditions like Isothermal (Temperature of Reaction Mass remains constant), perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. A batch reactor is a closed system with no input and output streams. The set up consists of a Reactor fitted in a constant temperature water bath. The temperature of the bath can be maintained from ambient to 90ºC with the help of Digital Temperature indicator Cum Controller. Samples can be taken out with the help of a sampling pipette. One stirrer is fitted for mixing the reactants in reactor and other is fitted in a water bath to keep the uniform temperature throughout in the bath.
Manufacturer, Supplier, and Exporter of Isothermal Semi Batch Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
An isothermal semi-batch reactor is a semi-closed system with one input stream. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. Before starting the reaction, the reactor is charged with a measured quantity of one reactant. From a feed tank, another reactant is fed to the reactor. Using a sampling pipette samples can be taken out for analysis after a fixed interval. Rotameter is provided to measure the flow of Chemicals. It is operated under conditions like Isothermal (Temperature of Reaction Mass remains constant) and perfectly mixed (composition of the reaction mixture is uniform throughout). The compressed air is used for circulation of feed. The temperature of the bath can be maintained from ambient to 70 OC with the help of Digital Temperature indicator Cum Controller. Pressure Regulator, Pressure Gauge, and Safety Valve are fitted in the compressed air line. One stirrer is fitted for mixing the reactants in reactor and other is fitted in a water bath to keep the uniform temperature throughout in the bath.
Manufacturer, Supplier, and Exporter of RTD Studies in Plug Flow Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
To predict the exact behaviour of a vessel as a Chemicals reactor, RTD or stimulus-response technique is used. The setup consists of one feed tank through which water is fed to the reactor. It is a helical coil tube type plug flow reactor made up of Stainless-steel pipe. Reactants enter at the lower end coming out of the top of the coil from where samples are collected for analysis. For understanding the RTD characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is provided Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from idealist can be due to channelling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To plot RTD curve for Plug Flow Reactor. The flow rate can be adjusted by operating the needle valve and measured by Rotameter. The magnetic drive pump is used for circulation of feed.
Manufacturer, Supplier, and Exporter of UV Photo Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
UV Photo reactors are commonly used in various chemical engineering reactions. These reactors are manufactured using the latest tools and equipment to ensure high standards of quality.
Manufacturer, Supplier, and Exporter of Vapor Liquid Equilibrium Apparatus Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
Vapor-Liquid Equilibrium ensures the equilibrium between the liquid and the vapor. Any substance which is at this equilibrium known as Saturated Fluid. It is a condition where the rate of evaporation (liquid changing to vapor) equals the rate of condensation. We have a range of such equipment that enhances the client’s trust for the requirement of high-quality product This condition is applicable for a molecular level. Vapor-Liquid Equilibrium Apparatus manufacturer and Supplier in India as well as worldwide.
Manufacturer, Supplier, and Exporter of Isothermal Plug Flow Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
Plug flow reactor is characterized by the fact that the flow of fluid through the reactor is orderly no element of fluid overtaking or mixing with any other element ahead or behind.
Manufacturer, Supplier, and Exporter of Adiabatic Batch Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
An adiabatic batch reactor is a closed system with no input and output streams. The flask is double insulated by ceramic wool insulation. Temp. is measured by digital temp indicator. The set-up consists of a Dewar flask of capacity 1 lit. fitted with a stirrer. This reactor is operated under conditions like adiabatic (Temperature of Reaction Mass keep on changing), Perfectly mixed (composition of the reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). The whole setup is mounted on a rigid M.S. frame. This set-up is used to study a catalytic homogeneous reaction under adiabatic condition.
Manufacturer, Supplier, and Exporter of RTD Packed Bed Reactor Apparatus Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The flow rate can be adjusted by operating the needle valve provided on Rotameter. Axial diffusion and dispersion of fluid in packed beds are important for design and operation of separation equipment and Chemicals reactors. The tracer technique, the most widely used method for the study of axial dispersion. The setup consists of a glass column packed with Rasching Rings and one feed tank. Water is fed to the reactor through a liquid distributor, fitted at the bottom of the column. Rotameter is provided to measure the flow of water. In stimulus-response experimentation, we perturb the system using pulse input of tracer and then see how the system reacts or responds to this stimulus. The analysis of the response gives the desired information about the system. Samples can be taken periodically from the top outlet of the reactor. For understanding the R.T.D. characteristics, a special arrangement to inject a tracer into the lower end of the reactor, using a syringe, is provided. Pressure Regulator & Pressure Gauge are fitted in the compressed air line.
Manufacturer, Supplier, and Exporter of Kinetics of Dissolution of Benzoic Acid Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTs
A Peltilizer is provided to make the solid cylinder size 1? diameter and 2? height of Benzoic Acid. The setup consists of a Reactor in which solid cylinder of Benzoic Acid is placed and water is stirred by means of a variable speed mixer. Baffles are also provided. The Reactor is made of Stainless Steel.
Manufacturer, Supplier, and Exporter of Emulsion Polymerization Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The emulsion is of the type: oil in water, the monomer is oil soluble & the initiator is water-soluble & an emulsifier is used to create a stable emulsion. Apparatus can be used to generate the kinetic data for emulsion polymerization under various operating conditions like temperature, emulsifier concentration etc. The set-up is used to carry out the emulsion polymerization involving polymerization of an unsaturated monomer like Styrene. Air has to be evacuated using a vacuum pump to create vacuum up to 30mm of Hg before passing the nitrogen supply. Initiator from the reservoir is supplied to the reactor under pressure. Polymerization is carried out under the atmosphere of air free nitrogen. Metered quantity of nitrogen gas from a cylinder passes through a de-oxygenation column & allowed to enter the reactor. The set-up is complete & self-contained with sampling ports. The set-up consists of jacketed type SS reactor fitted with a variable speed agitator & baffle. Hot water from a digitally controlled water bath is circulated in the jacket using a pump.
Manufacturer, Supplier, and Exporter of Condensation Polymerization Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The polymerization reaction can be acid catalysed or self-catalysed. Condensation Polymerization Reactor is used to carry out a condensation polymerization reaction under batch condition. The set-up can be used to measure the extent of reaction & also the reaction rate constant. The top cover can be removed for cleaning purpose. Feed is fed from the top through a funnel provided with S.S. Ball valve. An outlet is given to condenser fitted with a Perkin’s triangle for collecting the condensate. The set-up consists of jacketed type ss reactor fitted with variable speed agitator & baffles. Metered quantity of nitrogen gas from a cylinder, allowed entering the reactor. The set-up is complete & self-contained with sampling ports. Vapours are allowed to enter in the shell of the condenser and cooling water is allowed to pass through the tube and condensate is collected. The reactor is fitted with nichrome wire heaters and temperature is controlled by the digital temperature controller.
Manufacturer, Supplier, and Exporter of Hydrodynamics of Trickle Bed Reactor Apparatus Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
Air from a regulated pressure vessel passes through a sparked and allowed to enter in the column at the top. The liquid is feed from a tank, fitted with a pump and is distributed at the top of a column using a spray nozzle. The arrangement is made for changing the glass column conveniently and filling it with any type of packing required. Solenoid valves are provided in the feed line at the top of the column for instant release and close. The set-up consists of a glass column. The flow rate can be adjusted by operating the valves provided in the respective line. The set-up is fully accompanied by manometers required.
Manufacturer, Supplier, and Exporter of Combined Flow Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
Stirrer for MFR: Stainless Steel Impeller and shaft coupled with FHP motor make, Saponification Reaction Study in Coil Tube Type Plug Flow Reactor Saponification Reaction Study in an MFR. Saponification Reaction Study in a Combined Reactor To determine Reaction Rate Constant.
Manufacturer, Supplier, and Exporter of Recycled Bed Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The setup consists of catalyst packed column of Stainless Steel. Reactant from a fed tank is fed to the reactor through liquid distributor, fitted at one end of the column. Some part of product is recycled to the reactor using a low capacity sophisticated pump or by overhead tank system.
Manufacturer, Supplier, and Exporter of Spinning Basket Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The set-up consists of a reactor centrally having one spinning basket derived through a variable speed motor. The metered flow of reactant from feed tank is fed to the reactor at the bottom. The set-up can be used as batch wise of as continuous type. Sampling points are provided for analysis.
Manufacturer, Supplier, and Exporter of Plug Flow Reactor (Straight Tube Type) Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
In an ideal Plug Flow Reactor (Straight Tube Type) there is no mixing in the direction of flow and complete mixing perpendicular to the direction of flow. The concentration of reactants varies along the length of the reactor but not in radial direction. The set up consists of two feed tanks through which two reactants are fed to the reactor. It is a helical coil tube type reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in the coil tube type plug flow reactor. The magnetic drive pump is used for circulation of feed. Reactants enter at the lower end coming out of the top of the coil from where samples are collected for analysis. This set up is used to study a non-catalytic homogeneous reaction under isothermal condition.
Manufacturer, Supplier, and Exporter of Isothermal Continuously Stirred Tank Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The set up consists of three CSTR arranged in series and two feed tanks through which two reactants are fed to the reactor. Rotameter are provided to measure the individual flow of chemicals. The flow rate can be adjusted by operating the needle valves provided on respective rotameter.
Manufacturer, Supplier, and Exporter of Isothermal Plug Flow Reactor (Coiled Tube Type) Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
In an ideal Plug Flow Reactor (Coiled Tube Type) there is no mixing in the direction of flow and complete mixing perpendicular to the direction of flow. The concentration of reactants varies along the length of the reactor but not in radial direction. The set up consists of two feed tanks through which two reactants are fed to the reactor. It is a helical coil tube type reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in the coil tube type plug flow reactor.
Manufacturer, Supplier, and Exporter of Liquid Phase Chemical Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
Present set-up consists of a reactor vessel fitted with variable speed agitator and detachable baffles. This unit is designed to study chemical kinetics. Reactants are fed to the reactor, using pump and flow is regulated and monitored by individual Rota meter. An adjustable overflow device is provided in the reactor to conduct the experiment on different reactor volume. A Stainless-Steel Coil is immersed in the reactor through which the hot water supply is circulated. Temperature of the hot water is controlled by means of Temperature Controller and it enables the students to enhance the experimentation capabilities.
Manufacturer, Supplier, and Exporter of Fluidized Machine Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
We are offering a wide range of Fluidized Machine he setup consists of a glass column with fluidizing material i.e. beads, S.S. mesh to support the beads and with calming section. Pressure drop across fluidization can be measured by manometer. The setup studies in fluidization characteristics and relationship between the velocity of the fluid and pressure drop per unit length. The apparatus is close circuit type provided with suitable capacity tank, FHP pump, necessary pipeline valves and a Rotameter to measure the flow rate of fluid. The setup is fitted on a MS frame painted with good quality paint.
Manufacturer, Supplier, and Exporter of Stirred Tank Bioreactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
Stirred tank bioreactors (STBRs) are the reactors most widely employed for culturing of biological agents such as cells, enzymes, or antibodies. They are contactors where the well-mixed among phases is obtained mainly by internal mechanical agitation.
Manufacturer, Supplier, and Exporter of Liquid in Liquid Diffusion Apparatus Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The liquid diffusivities coefficient apparatus laboratory equipment has been designed to enable measurement of molecular diffusivities relating to an equimolar counter-diffusion process and in so doing, familiarise students with the basic notions of mass transfer theory.
Manufacturer, Supplier, and Exporter of Catalytic Reactor Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
Catalysis is the change in rate of a chemical reaction due to the participation of a substance called a catalyst. One of the features of catalysts is that they are not consumed by the chemical reaction, although it is possible that they suffer some deterioration.
Manufacturer, Supplier, and Exporter of Liquid Liquid Extraction in Packed Bed Lab Equipment by ELSHADDAI ENGINEERING EQUIPMENTS
The set-up consists of a glass column packed with Raching rings. Continuous counter current contacts between the solvent and solute phases is made, which results into extract and raff in streams. Flow meters (Rota meters) are used to note the flow of solvent & solute respectively. The continuous and dispersed phase streams are metered and derived from separate containers. The total set-up is housed in a well- designed rigid structure. The structure also supports tanks, piping, Rota meters, and panes land other units.
Welcome to Elshaddai Engineering Equipments! With over 25 years of expertise, we provide high-quality laboratory equipment worldwide. Count on us for innovation, precision, and reliability.
© elshaddaiengineeringequipments 2024. All Rights Reserved.
