DEVICES AND CIRCUITS, INSTRUMENTATION, DIGITAL SIGNAL PROCESSING MICROPROCESOR AND MICROCONTROLLER LABORATORY

BC 107

ELSHADDAI –DIDM– 001

Manufacturer, Supplier, and Exporter of DEVICES AND CIRCUITS, INSTRUMENTATION, DIGITAL SIGNAL PROCESSING MICROPROCESOR AND MICROCONTROLLER LABORATORY instruments in BIO MEDICAL ENGINEERING by ELSHADDAI ENGINEERING EQUIPMENT The BC107 is a widely used NPN bipolar junction transistor (BJT) designed for low current, low power, medium voltage, and general-purpose switching and amplification applications. It is commonly used in electronic circuits for signal processing, small audio amplification, and switching tasks.

BC 148

ELSHADDAI –DIDM– 002

The BC148 is a general-purpose NPN bipolar junction transistor (BJT) commonly used in low-power, low-frequency electronic applications such as signal amplification and switching. It belongs to the BC series of transistors and is closely related to the BC107, BC108, and BC109 family.

2N2646

ELSHADDAI –DIDM– 003

The 2N2646 is a unijunction transistor (UJT) primarily used in triggering, timing, and oscillator circuits. It is known for its simplicity, reliability, and effectiveness in generating pulse and timing waveforms. Unlike BJTs or FETs, the UJT is not used for amplification but excels in applications involving switching and timing control.

BFW10

ELSHADDAI – DIDM– 004

The BFW10 is a general-purpose N-channel Field Effect Transistor (FET), widely used in small-signal amplification and switching applications. Known for its high input impedance and low noise characteristics, the BFW10 is ideal for use in RF amplifiers, oscillators, and low-level audio circuits.

1N4007

ELSHADDAI – DIDM– 005

The 1N4007 is a widely used general-purpose silicon rectifier diode, known for its reliability, durability, and affordability. It is primarily used for converting alternating current (AC) to direct current (DC) in rectification applications.

ZENER DIODES

ELSHADDAI – DIDM– 006

Zener diodes are a special type of semiconductor diode designed to allow current to flow in the reverse direction when a specific, pre-defined reverse voltage (Zener voltage) is reached. They are primarily used for voltage regulation, voltage reference, and overvoltage protection in electronic circuits.

RESISTORS, CAPACITORS AND INDUCATORS

ELSHADDAI – DIDM– 007

Resistors, capacitors, and inductors are essential passive electronic components widely used in analog and digital circuits for controlling current, voltage, and signal behaviour. Resistors oppose or limit the flow of electric current in a circuit. Capacitors store and release electrical energy in the form of an electric field. Inductors store energy in the form of a magnetic field when current flows through them.

BREAD BOARDS

ELSHADDAI – DIDM– 008

A breadboard is a reusable, solderless device used for prototyping and testing electronic circuits. It allows components to be easily inserted and removed, making it ideal for learning, experimentation, and rapid circuit development without the need for permanent assembly.

DSO

ELSHADDAI – DIDM– 009

A Digital Storage Oscilloscope (DSO) is an essential test and measurement instrument used to observe, measure, and analyze varying electrical signals over time. It captures real-time signals and digitally stores them for detailed examination, enabling engineers and technicians to troubleshoot and design electronic circuits accurately.

CRO (30 MHz)

ELSHADDAI – DIDM– 010

A Cathode Ray Oscilloscope (CRO) is an essential analog electronic test instrument used for observing, measuring, and analyzing electrical signals. It visually displays voltage signals as waveforms on a screen, making it invaluable for understanding signal behavior in time and voltage domains.

FUNCTION GENERATORS

ELSHADDAI – DIDM– 011

A Function Generator is a versatile electronic test instrument used to generate various types of electrical waveforms over a wide range of frequencies. It is widely used in testing, designing, and troubleshooting analog and digital circuits.

SIGNAL GENERATORS

ELSHADDAI – DIDM– 012

A Signal Generator is an essential electronic test instrument used to produce electrical signals with specific frequencies, amplitudes, and waveforms. It is widely used in the design, testing, and troubleshooting of electronic systems, especially in RF, communication, and audio applications.

CRO(20MHz)

ELSHADDAI – DIDM– 013

DUAL DC REGULATED POWER SUPPLY 0-+30V

ELSHADDAI – DIDM– 014

A Dual DC Regulated Power Supply is a laboratory-grade power source that provides two simultaneously available and independently regulated positive and negative DC outputs. It is widely used in electronics labs, testing environments, and educational institutions to power analog and digital circuits requiring both +V and –V supplies.

DC REGULATED POWER SUPPLY

ELSHADDAI – DIDM– 015

A DC Regulated Power Supply is an essential laboratory and industrial instrument that provides a stable and adjustable direct current (DC) voltage output, unaffected by variations in input voltage or load conditions. It is widely used in testing, prototyping, educational labs, and servicing electronic equipment.

8086 MICROPROCESSOR TRAINER KIT WITH POWER SUPPLY

ELSHADDAI – DIDM– 016

The 8086 Microprocessor Trainer Kit with Power Supply is an educational and development platform designed to help students, engineers, and hobbyists learn and experiment with the Intel 8086 microprocessor architecture. It comes equipped with all the necessary hardware and interfaces to perform programming, debugging, and interfacing of peripherals in real time.

8051 MICROCONTROLLER TRAINER KIT

ELSHADDAI – DIDM– 017

The 8051 Microcontroller Trainer Kit is an educational and development platform designed to provide hands-on learning and experimentation with the Intel 8051 microcontroller architecture. It is widely used in engineering colleges, technical institutes, and R&D labs for training, programming, and interfacing projects.

TRAFFIC LIGHT CONTROL H 8086 & 8051 KIT

ELSHADDAI – DIDM– 018

The Traffic Light Control Kit based on 8086 and 8051 microcontroller/microprocessor is a practical training system designed to simulate and demonstrate the working of a real-world traffic signal control system. It helps students understand embedded system concepts, I/O interfacing, and real-time programming using 8086 microprocessor and 8051 microcontroller architectures.

STEPPER MOTOR CONTROL INTERFACING COMPATIABLE WITH 8086 & 8051 KITS

ELSHADDAI – DIDM– 019

The Stepper Motor Control Interfacing Module is a specialized hardware unit designed to interface and control a stepper motor using 8086 microprocessor or 8051 microcontroller trainer kits. It enables hands-on learning and practical experimentation in motor control, digital logic, and embedded systems.

DIGITAL CLOCK INTERFACING BOARD COMPATIABLE WITH 8086 & 8051 KITS

ELSHADDAI – DIDM– 020

The Digital Clock Interfacing Board is a specialized add-on module designed for seamless integration with 8086 microprocessor and 8051 microcontroller trainer kits. It helps students understand real-time digital clock implementation using microprocessor/microcontroller programming and peripheral interfacing.

KEYBOARD & DISPLAY INTERFACE BOARD COMPATIBLE WITH 8086 & 8051 KITS

ELSHADDAI – DIDM– 021

The Keyboard & Display Interface Board is a versatile training module designed for seamless interfacing with 8086 microprocessor and 8051 microcontroller trainer kits. It enables learners to perform practical experiments involving keypad input and 7-segment display output, using concepts such as scanning, multiplexing, and interrupt handling.

PRINTER INTERFACING CARD COMPATIBLE WITH 8086 & 8051 KITS

ELSHADDAI – DIDM– 022

The Printer Interfacing Card is a hardware module designed to connect standard parallel port printers (Centronics interface) with 8086 microprocessor and 8051 microcontroller trainer kits. It enables users to explore the practical implementation of data transfer from embedded systems to a printer, demonstrating peripheral interfacing, data formatting, and control signaling.

ELSHADDAI ENGINEERING EQUIPMENTS