We are the best soil mechanics lab equipment manufacturers for our valued customers. We provide high quality Soil Mechanics Lab Equipment in Nigeria, Ethiopia, Egypt, Tanzania, South Africa, Sudan, Kenya. It is used to test soil for qualities like moisture content and assurance of value, among other things. This is a generally useful tool that helps with thoroughly examining the various features of the soil before use. When deciding how best to use the dirt, it is helpful to actually look at its thickness and level of moisture. At times, consultants supervise the fabrication of premium components used in this.

Sieves - ELSHADDAI –
CVL – 001

Conforming to the specifications and tolerance in accordance to I.S. 460 for fine materials made out of 20cms. Diam spun type joint less polished brass frame easily fit on each other equipped with stainless-steel wire mesh aperture size

SOIL HYDROMETER - ELSHADDAI –
CVL – 002

Conforming to the specifications and tolerance in accordance to I.S.2720 Part-IV and 3104 used for the grain size analysis of soils where more than 10% of the material will pass through 75microns I.S. SIEVE. Manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is engraved.

Softening Point Apparatus Ring - ELSHADDAI –
CVL – 003

Conforming to the specifications and tolerance in accordance to I.S.2720 part-v and latest I.S.9259.Consists of a hard rubber base carrying a sliding carriage assembly to which a brass cup is hinged. The cup is raised and allowed to fall through a height of 1cm by the help of a lead screw provided at the back of the sliding carriage.

LIQUID AND PLASTIC LIMIT APPARATUS - ELSHADDAI – CVL – 004

Conforming to the specifications and tolerance in accordance to I.S.-2720 consists of followings:-Glass plate 20cm x 15cm. with ground edge, Stainless steel spatula 2cm. wide and 8cms. Long with wooden handle, Brass rod 3mm. dia, Measuring cylinder 25 ml x 0.5 ml graduations.

SHINKAGE LIMIT APPARATUS- ELSHADDAI –
CVL – 005

Conforming to the tolerance and specifications in accordance to I.S.2720 part-vii, for the determination of the water content level after which any further reduction in the water content will not cause a corresponding decrease in the volume of the soil mass.

Proctor Compaction Apparatus- ELSHADDAI –
CVL – 006

Conforming to the specifications and tolerance in accordance to I.S.-2720 Pt.-XV. The equipment consists of followings: – Loading Unit:-maximum capacity 20kg/cm.sq. Consisting of loading yoke connected to a lever arm with a counterbalancing adjustment and having a lever ration 1: 10. The whole assembly being mounted on a steel frame. Consolidation cell assembly.

DIRECT SHEAR APPARATUS- ELSHADDAI –
CVL – 007

Conforming to the Specifications and tolerance in accordance to I.S.-2720 Part-XXVIII consists of :- Small sand pouring cylinder 3 liter capacity mounted above a pouring cone and separated as a shutter hole. Cylindrical Calibrating container internal diam 100mm and internal depth 150mm fitted with a flendge 5 cm. wide. Metal Tray 30cms square and 4 cms. Deep with a 10cms. Hole in the centre.

THERMEOMETER - ELSHADDAI –
CVL – 008

Used for soil specimen of 38mm diam x 76mm. long Conforming to the specimen and tolerance in accordance to I.S.2720 Part-XII.

TRIAXIAL SHEAR APPARATUS- ELSHADDAI –
CVL – 009

Conforming to the Specifications and tolerance in accordance to I.S.-2720 Part-XXVIII consists of :- Small sand pouring cylinder 3 liter capacity mounted above a pouring cone and separated as a shutter hole. Cylindrical Calibrating container internal diam 100mm and internal depth 150mm fitted with a flendge 5 cm. wide. Metal Tray 30cms square and 4 cms. Deep with a 10cms. Hole in the centre.

Three gang consolidation test device- ELSHADDAI –
CVL – 010

Used for soil specimen of 38mm diam x 76mm. long Conforming to the specimen and tolerance in accordance to I.S.2720 Part-XII.

Three gang consolidation test device- ELSHADDAI –
CVL – 011

Conforming to the Specifications and tolerance in accordance to I.S.-2720 Part-XXVIII consists of :- Small sand pouring cylinder 3 liter capacity mounted above a pouring cone and separated as a shutter hole. Cylindrical Calibrating container internal diam 100mm and internal depth 150mm fitted with a flendge 5 cm. wide. Metal Tray 30cms square and 4 cms. Deep with a 10cms. Hole in the centre.

Tile Abrassion testing machine- ELSHADDAI –
CVL – 012

The wear of the tile is measured using thickness measuring device (which is supplied at extra cost). TheAbrasion Testing Machine consists of a replaceable grinding path, fitted on to a disc rotating about its vertical axis. A funnel is provided to facilitate charging the grinding path withabrasive powder.

TILE FLEXURAL TESTING MACHINE- ELSHADDAI –
CVL – 013

Unit for finding flexural strength of clay roofing tiles and cement concrete flooring tiles. Flexural load is applies on the tiles using lead shots. The machine consists of a stand on which two 40mm dia bearing rollers or 12mm dia rollers are placed at centre distance of 150mm, 200mm, 250mm, or 270mm as the case may be. The third upper roller applies centrally flexural load by means of lever arrangement